White bubble mailers – with print.

Types of FLEXO prints to choose from

We can handle any type of print. The following information is for specialists, but you don’t need to be familiar with it to submit an inquiry. Just send us your files and describe what you’re looking for, and we will propose the best solution for you.

SINGLE-SIDED FLEXO PRINTING – from 1+0 to 6+0 / from 0+1 to 0+6.

• Print from 1 to 6 selected colors;

• Single-sided front or back printing;

• Available for orders of 5,000 pieces and above;

• Worth noting: 1+0 and 2+0 as well as 0+1 and 0+2 prints are the most cost-effective and most commonly chosen for bubble mailers.

  1+0           0+6

DOUBLE-SIDED FLEXO PRINTING – from 1+1 to 6+6

• Print from 1 to 6 colors;

• Double-sided printing;

• Available for orders of 5,000 pieces and above;

• Packair is a leader in the production of bubble mailers with double-sided printing!

  1+1           6+6

SINGLE OR DOUBLE-SIDED FLEXO PRINTING – APLA with selection

• Print on the entire surface of the mailer;

• Printing is usually double-sided;

• Front print: 1-6 colors (non-matching), back print: 1 color;

• Available for orders of 5,000 pieces and above.

  1+1          2+1

1+1

Worth noting: Colors are selected based on the provided files or as specified by the client. Single-color printing is the most cost-effective and most commonly chosen option.

Information for specialists: Bubble mailers are made from two independent rolls of paper—one for the front and one for the back. PACKAIR is a leader in the production of bubble mailers with double-sided printing.

For orders above 5,000 pieces, we perform prints on 75 g/m² white offset paper. Offset paper is the most commonly chosen for CMYK printing and is preferred due to its lower cost compared to Kraft paper.

Are you looking for bubble envelopes made of brown paper? Brown bubble envelopes with printing?

Product packaging information:

• The bubble envelopes are packed in brown cardboard boxes.
• The boxes are sealed with paper tape.
• Each box is labeled with information regarding its contents.

Variant A – Straight flap. STANDARD

Flap elements:

• I – Adhesive
• II – Silicone-coated paper strip protecting the adhesive from drying out.

Options for Variant A:

• 1 – The packer places the item in the envelope and removes the silicone-coated strip.

• 2 – The packer closes the flap, and the adhesive securely bonds to the paper. The item is then ready for shipment.

• 3 – The recipient opens the flap by pulling on it and removes the item. The mailer’s design allows for recycling, separating the paper from the plastic film.

– Flap elements:

I – Adhesive;
II – Silicone-coated paper strip protecting the adhesive from drying out;
III – Holes for seals (for formats A/11, B/12, and C/13, as well as other formats with an mailers width up to 15 cm – 1 hole. Wider mailers are equipped with 2 holes for seals).

Options for Variant B:

1 – The packer places the item in the mailer and removes the silicone-coated strip.

2.a – The packer closes the flap, and the adhesive securely bonds to the paper. The item is then ready for shipment;
OR
2.b – The packer closes the flap, the adhesive bonds to the paper, and a security seal with a unique number is applied. The item is then ready for shipment.

3 – The recipient opens the flap by pulling on it and removes the contents. The mailer’s design allows for recycling by separating the paper from the plastic film.

Variant C – Trapezoid flap, envelope with control strip, no seal holes

Flap elements:

I – Adhesive;
II – Silicone-coated paper strip protecting the adhesive from drying out;
III – Trapezoid cutout to facilitate lifting the flap from the polyester control strip;
IV – Control strip – used to inspect the contents after packing and before shipping. Allows the flap to be opened without damaging the flap or the adhesive.

Options for Variant C:

1 – The packer places the item in the mailer and removes the silicone-coated strip.
2 – The packer closes the flap, sticking it to the control strip; the adhesive seals the mailer temporarily.
3 – The inspector lifts the flap from the control strip, checks the contents, and adds any documents if needed.
4 – The inspector re-seals the flap; this time, the adhesive bonds permanently to the paper. The item is then ready for shipment.
5 – The recipient opens the flap by pulling on it and removes the contents. The mailer’s design allows for recycling by separating the paper from the plastic film.

Variant D – Trapezoid flap, mailer with control strip and seal holes

Flap elements:

I – Adhesive
II – Silicone-coated paper strip protecting the adhesive from drying out
III – Trapezoid cutout to facilitate lifting the flap from the polyester control strip
IV – Holes for seals (for formats A/11, B/12, and C/13, as well as other formats up to 15 cm in width – 1 hole. Wider mailers are equipped with 2 seal holes)
V – Control strip – used to inspect the contents after packing and before shipping. Allows the flap to be opened without damaging the flap or the adhesive

Options for Variant D:

1 – The packer places the item in the mailer and removes the silicone-coated strip.
2 – The packer closes the flap, sticking it to the control strip; the adhesive seals the mailer temporarily.
3 – The inspector lifts the flap from the control strip, checks the contents, and adds any documents if necessary.
4.a – The inspector re-seals the flap; this time, the adhesive bonds permanently to the paper. The mailer is ready for shipment;
OR
4.b – The inspector re-seals the flap, the adhesive bonds permanently to the paper, and a security seal with a unique number is applied. The mailer is ready for shipment.
5 – The recipient opens the flap by pulling on it and removes the contents. The mailer’s design allows for recycling by separating the paper from the plastic film.

Variant E – E-commerce flap

Mailer with a tear strip for easy opening and an additional adhesive strip for returns.

Flap elements:

I – Adhesive – x2
II – Tear tape / filament – Enables quick and easy opening of the mailer without damaging the second adhesive strip (covered with a white silicone-coated liner)
III – Silicone-coated paper strip protecting the adhesive from drying out – x2
IV – Perforations – Located on both sides of the strip (left and right sides of the mailer), allowing for smooth tearing to open the mailer

Options for Variant E:

1 – The packer places the item in the mailer and removes the wider, upper silicone-coated strip.
2 – The packer closes the flap; the adhesive bonds permanently to the paper. The mailer is ready for shipment.
3 – The recipient opens the flap by pulling the tear tape from the left or right side at the clearly marked perforations.
4 – The tear tape cuts through the flap without damaging the second adhesive strip. The recipient removes the contents.
5 – If the recipient chooses to return the item, they place it back in the mailer along with the necessary documents and remove the second silicone-coated strip.
6 – The recipient reseals the flap; the adhesive bonds permanently to the paper. The return is ready to be sent.
7 – The seller opens the flap by pulling on it and retrieves the returned item. The mailer’s design allows for recycling by separating the paper from the plastic film.

Variant F – Flap with tear strip for opening

Flap elements:

I – Adhesive – x1
II – Tear tape / filament – Enables quick and easy opening of the mailer
III – Silicone-coated paper strip protecting the adhesive from drying out – x1
IV – Perforations – Located on both sides of the strip (left and right edges of the mailer), allowing for smooth tearing to open the mailer

Options for Variant F:

1 – The packer places the item in the mailer and removes the silicone-coated strip.
2 – The packer closes the flap; the adhesive bonds permanently to the paper. The mailer is ready for shipment.
3 – The recipient opens the flap by pulling the tear tape from the left or right side at the clearly marked perforations. The tape cuts through the flap.
4 – The recipient removes the contents. The mailer’s design allows for recycling by separating the paper from the plastic film.

Available seal constructions on the market are made from various materials, but their purpose remains the same. Each seal has a unique number. It is applied to secure the goods against tampering and unauthorized opening.

Ask about FSC® certified products

It is possible to order bubble mailers made with FSC® certification and with the FSC® product label applied to the front or back of the mailer.

For white offset paper (75g/m²), the FSC® MIX category is available.

Mailers can be produced with the FSC® license code C134989 assigned to Packair Sp. z o.o., with the final customer’s FSC® license code, or with the FSC® license code of the intermediary.

The certification is available for any order quantity and does not require an additional charge. Ask about FSC® certified products.

What files should you provide:

• GRAPHIC FILES FOR QUOTATION: You can send a description of the print and attach your logo, or provide a sample design, or upload a ready-to-print file.
• GRAPHIC FILES FOR PRINTING: Ready-to-print files or materials in curves or bitmap format with a resolution of at least 300 dpi. (If you’re unsure what this means or have any issues, just let us know – we’ll be happy to assist).

Good to know: Ecobag Network will support you every step of the way in your order. If something is unclear, don’t waste your precious time – just send us what you know, and we’ll take care of the rest and offer expert advice.

What do you need to determine to submit an inquiry?

3. Determine the order quantity
   (Most commonly ordered – quarterly demand)

4. Choose the formats of the bubble mailers
   (Most often more than one format – different sizes for various products being shipped)

5. Provide files or descriptions of the print you are interested in
   (We select the printing technology based on the description, sample file, or print-ready file you send)

GO TO QUOTATION OR CALL US!